Operation method of blister packaging machine

Operation method of blister packaging machine:

① Prepare medicines and packaging materials, replace the batch number template, install PVC and aluminum foil, check the cooling water, and carefully clean the equipment; [1]

②Turn on the power switch and connect the compressed air;

③Press the heating button, and adjust the heating and heat sealing temperature control tables to the appropriate temperature respectively;

④ Pull the PVC hard sheet through the channel to the punching knife, and pull the aluminum foil to the heat sealing plate;

⑤ When the heating plate and the heat sealing plate rise to the appropriate temperature, adjust the cooling thermometer to the appropriate temperature (generally it should be 30℃);

⑥ When the medicine is covered with the whole feeding track, press the green button of the motor to run the empty car. After the foam blowing, heat sealing and punching meet the requirements, press the vibration button of the tablet bucket and the planetary cloth switch;

⑦ When adjusting the blanking, make the blanking meet the requirements and carry out normal packaging;

⑧ After the packaging, shut down in the following order: press the tablet hopper shutdown button - press the red button of the motor - the main engine stops - turn off the main power switch - close the intake valve - close the water inlet valve. Then clean up the machine and site, and maintain the packaging equipment.