Capsule filling board operation demonstration

Capsule filling board operation demonstration:

Place the guide plate on the A plate (cap plate), put the appropriate amount of capsule cap into the guide plate, shake it back and forth, so that the capsule cap falls into the guide hole. After the capsule caps are arranged, pour out the excess capsule caps,

Remove the guide plate.

Place the guide plate on the B plate (body plate) and put it in place, pour an appropriate amount of capsules into the guide plate and shake it back and forth to make the capsules fall into the guide holes. After the capsule caps are arranged, pour out the excess capsule body,

Remove the guide plate.

Pour the medicinal powder on the arranged B plate, use

The scraper scrapes back and forth to fill the powder

capsules. Place the middle plate on the A plate (cap plate) with the friction side of the middle plate facing up. With the B plate (body plate) on the lower A plate (cap plate) and the upper middle plate in the middle, align the three plates.

Gently tap, the capsule is ready

combined state. Press the A-plate firmly to make the capsules fit each other. Remove the A-plate (cap plate)

Remove the middle plate, and you can see that the capsules that are fitted are all on the middle plate. Flip over the middle plate and the capsule falls.